Re: #usecaseui #usecaseui


Gareth Roper
 

Hi,

 

This is the error I am receiving when attempting to travel to this URL:

 

 

However, connecting to a different endpoint at the same URL/Port appears to work fine:

 

Is there something I am missing, or something I need to change with the deployment of the UUI pods?

 

Thank you for your response.

 

Regards,

Gareth

 

 

 

From: hekeguang@... <hekeguang@...>
Sent: Friday 5 June 2020 03:16
To: Gareth Roper <gareth.roper@...>
Cc: Xu Ran <xuranyjy@...>; onap-discuss@...
Subject: Re: Fwd: [onap-discuss] #usecaseui

 

Hi Gareth,

 

Have you tried the following access mode, HTTPS mode and port 30283.

 

You can use the following IP address to access, if there is a problem, please give me feedback, thank you!

 

 


 

From: Xu Ran

Date: 2020-06-05 10:03

To: hekeguang

Subject: Fwd: [onap-discuss] #usecaseui

FYI


---------------------------------------------
徐冉
中国移动通信有限公司研究院--人工智能和智慧运营研发中心
中国北京市西城区宣武门西大街32号(100053
 
Xu Ran
China Mobile Research Institute
No.32 Xuanwumen west street,Xicheng District, Beijing 100053, China
 
Mobile: +86 15010868144
Email:  xuranyjy@...
---------------------------------------------



下面是被转发的邮件:

 

发件人: "Gareth Roper" <gareth.roper@...>

主题: 回复:[onap-discuss] #usecaseui

日期: 202064 GMT+8 下午8:29:52

回复-收件人: onap-discuss@...,gareth.roper@...

 

Hi Xu,

 

Thank you very much for your response, apologies in advance for my large response.

 

I have followed the FAQ on the Wiki page you linked, and have ensured that UUI and UUI-Server are registered in MSB. When I attempt to view UUI through MSB (On the ONAP Portal) I receive the following error:

 

Bad Request

This combination of host and port requires TLS.

 

As shown in screenshot below:

 

 

When attempting to connect to the UUI dashboard through the MSB page, I receive the following:

 

 

If I try to access UUI directly (“uui” is set as the VM running UUI IP in hosts file) I receive the following:

 

Alternatively if I attempt to access UUI directly, while using the UUI services’ Nodeport value I receive the following:

 

I have also attached 2 JSON files, which show the registered services in MSB for UUI and UUI-server, just in case there is an issue with the registered service.

 

The images in use on our deployment are:

Finally, following the FAQ you linked, I ran the command “kubectl edit svc uui-server -n onap” and this is the output:

 

Any further help/knowledge regarding this issue would be much appreciated.

If there is any further information which you may need, please let me know.

 

Regards,

Gareth

 

From: Xu Ran <xuranyjy@...> 
Sent: Thursday 4 June 2020 03:08
To: 
onap-discuss@...; Gareth Roper <gareth.roper@...>
Subject: Re: [onap-discuss] #usecaseui

 

Hi Gareth,

 

The ways of solving common problems of UUI deployment is written in this wiki: https://wiki.onap.org/pages/viewpage.action?pageId=81407556 . So just try out the methods recorded in that wiki, if it doesn’t work, please provide us with more details of your system to figure out your problem. Hope can help you. 

 

B.R.


---------------------------------------------
 
Xu Ran
China Mobile Research Institute
No.32 Xuanwumen west street,Xicheng District, Beijing 100053, China
 
Mobile: +86 15010868144
Email:  xuranyjy@...
---------------------------------------------




202063 下午9:48Gareth Roper <gareth.roper@...> 写道:

 

Hi,

I have recently been trying to use UUI to onboard a NS package, as described in this guide: 
https://wiki.onap.org/display/DW/vCPE+with+Tosca+VNF+Test+Guide

However, I have been unable to access the UUI dashboard. I have followed these tutorials:

I cannot access UUI through the ONAP Portal and I receive either the error "default backend - 404" on a blank web page or "This host requires TLS" when attempting to access the site directly. 

Does anyone know of any more up-to-date guides for UUI, or have any experience with these access issues?

Regards,
Gareth 

 

 

Join onap-discuss@lists.onap.org to automatically receive all group messages.