Hi,
Thank you for your email, the fix you recommended has solved the issues I was having. I’m not quite sure why they “enable_ssl” was set to false.
Regardless, that change fixed my issue immediately, so I can access UUI now, thank you very much.
Regards,
Gareth
toggle quoted message
Show quoted text
From: hekeguang@... <hekeguang@...>
Sent: Monday 8 June 2020 15:20
To: Gareth Roper <gareth.roper@...>
Cc: '徐冉（研究院）' <xuranyjy@...>; onap-discuss@...
Subject: Re: RE: Fwd: [onap-discuss] #usecaseui
I found some problems in your previous attachment. Both for uui-ui and uui-server, the enable_ssl is false, but the value should be true.
Can you check this porblem, and you can re register with MSB, and make the value of enable_ssl to be true.
 
Subject: RE: Fwd: [onap-discuss] #usecaseui
Hi,
This is the error I am receiving when attempting to travel to this URL:
However, connecting to a different endpoint at the same URL/Port appears to work fine:
Is there something I am missing, or something I need to change with the deployment of the UUI pods?
Thank you for your response.
Regards,
Gareth
Have you tried the following access mode, HTTPS mode and port 30283.
You can use the following IP address to access, if there is a problem, please give me feedback, thank you!
Subject: Fwd: [onap-discuss] #usecaseui
FYI
---------------------------------------------
徐冉
中国移动通信有限公司研究院--人工智能和智慧运营研发中心
中国北京市西城区宣武门西大街32号（100053）
Xu Ran
China Mobile Research Institute
No.32 Xuanwumen west street,Xicheng District, Beijing 100053, China
Mobile: +86 15010868144
Email: xuranyjy@...
---------------------------------------------
主题:
回复：[onap-discuss] #usecaseui
日期:
2020年6月4日
GMT+8 下午8:29:52
Thank you very much for your response, apologies in advance for my large response.
I have followed the FAQ on the Wiki page you linked, and have ensured that UUI and UUI-Server are registered in MSB. When I attempt to view UUI through MSB (On the ONAP Portal) I receive the following error:
This combination of host and port requires TLS.
As shown in screenshot below:
When attempting to connect to the UUI dashboard through the MSB page, I receive the following:
If I try to access UUI directly (“uui” is set as the VM running UUI IP in hosts file) I receive the following:
Alternatively if I attempt to access UUI directly, while using the UUI services’ Nodeport value I receive the following:
I have also attached 2 JSON files, which show the registered services in MSB for UUI and UUI-server, just in case there is an issue with the registered service.
The images in use on our deployment are:
Finally, following the FAQ you linked, I ran the command “kubectl
edit svc uui-server -n onap” and this is the output:
Any further help/knowledge regarding this issue would be much appreciated.
If there is any further information which you may need, please let me know.
The ways of solving common problems of UUI deployment is written in this wiki: https://wiki.onap.org/pages/viewpage.action?pageId=81407556 .
So just try out the methods recorded in that wiki, if it doesn’t work, please provide us with more details of your system to figure out your problem. Hope can help you.
---------------------------------------------
Xu Ran
China Mobile Research Institute
No.32 Xuanwumen west street,Xicheng District, Beijing 100053, China
Mobile: +86 15010868144
Email: xuranyjy@...
---------------------------------------------
I cannot access UUI through the ONAP Portal and I receive either the error "default backend - 404" on a blank web page or "This host requires TLS" when attempting to access the site directly.
Does anyone know of any more up-to-date guides for UUI, or have any experience with these access issues?
Regards,
Gareth
|
