Hi Team, As part of SMO deployment of OAM, I need to do OOM Setup. Where I have followed the OOM setup for the Frankfurt Release. On following the link SMO deployment Link SMO OAM deployment I manged

#frankfurt #elalto #oom

Great!

#elalto #multicloud

I checked sdnc Karaf logs, and it looks OK and no special error to the preload I did. I bounced sdnc-sdnc-0 pod and now I'm not getting the message "No preload data found to match vnf-name" when I ins

#elalto #multicloud

I see no error, so you may need debug the sdnc component.

#elalto #multicloud

Hi Bin, Thanks for your reply. Actually I was following the same videos links and pdf document you shared with us before. I'm attaching the cFW package I on-boarded in SDC and service distribution for

#elalto #multicloud

Hi Kamel, Need more details on how to add service, add node instance (generic vnf) , preload vf module data, and add vf module, what’s more , make sure you are using the old VNF API from VID portal. T

#elalto #multicloud

Hi Bin Yang and Community, I tried to reproduce your demo for firewall-sriov CNF you presented during LFN Virtual event in our ONAP El-Alto LAB. All the steps went well until cfw1vfm1-sriov instantiat

#elalto #multicloud

Please open a ticket on Jira, so that this can be tracked/followed. Please attach there relevant logs from /var/log/onap folder. BTW, you’re saying that you’re using the El-Alto version, but by VID’s

#portal #vid #elalto

I am trying to use VID for instantiating a service and deploying a VNF in Openstack. All the models are properly designed and onboarded using SDC (similar to vFW use case). After selecting the "subscr

#portal #vid #elalto

Sure, you could refer to this link here: https://wiki.onap.org/display/DW/Creating+a+Netconf+Mount By the way, below link is an automatic approach for creating a Netconf mount: https://wiki.onap.org/d

#elalto #appc

Sure, you could refer to this link here: From: Rajewski Łukasz - Hurt <Lukasz.Rajewski@...> Date: Monday, May 18, 2020 at 11:22 PM To: "onap-discuss@..." <onap-discuss@...

#elalto #appc

Zhuangyang, could you share with us how to create the mountpoint in APPC? Regards, Łukasz Rajewski, R&D Expert Orange Labs Poland, Advanced Network Solutions Agency Mob.: +48 519 310 854 Orange Polska

#elalto #appc

Hello Raghu, Could you please send us the detailed clamp logs for the Submit action? Thanks! Kr, Xue

#clamp #elalto

PUT https://{{appc_ssl_port}}/restconf/config/network-topology:network-topology/topology/topology-netconf/node/{{vnf_id}}/yang-ext:mount/stream-count:stream-count { "stream-count:stream-count": { "str

#elalto #appc

I managed to mount Netconf point. But failed to get the current streams being active in our Packet Generator, result is below {"errors":{"error":[{"error-type":"protocol","error-tag":"data-missing","e

#elalto #appc

Use the appc wiki page to check both config and operational data on the mount. The mount state is probably in connecting still if there is a problem with the netconf hello message exchange. Could be t

#elalto #appc

If that curl command gets result back, even it’s an error – that means restconf call from APPC is working. It sounds like netconf mount has issue from the curl result Taka

#elalto #appc

Hi Taka, Unfortunately CMRI lab env is not able to make containers access the internet. I try to curl from k8s node to appc svc IP, the result is listed below email. From my perspective, the result wo

#elalto #appc

Hi, I am trying to design and deploy a MS Designin CLAMP. I have followed this link https://docs.onap.org/en/elalto/submodules/integration.git/docs/docs_scaleout.html While Submitting, I am getting th

#clamp #elalto

You actually can “hack” install curl by login as root in docker. Taka

#elalto #appc