|
#oom #helm
#oom
#helm
Dear All, We have deployed the Onap master branch of Frankfurt and meet the same issue which is opened in https://jira.onap.org/browse/OOM-2534 SDC and SDNC modules could not be installed successfully
Dear All, We have deployed the Onap master branch of Frankfurt and meet the same issue which is opened in https://jira.onap.org/browse/OOM-2534 SDC and SDNC modules could not be installed successfully
|
By
Gülsüm Atıcı
· #22310
·
|
|
#oom #helm
#oom
#helm
I ran into the issue as well. Very similar to yours. It was related to OOM-2534 per OOM team. They are still working on it. Thanks, Xin Miao Solution Engineering Fujitsu Network Communication (W)972-4
I ran into the issue as well. Very similar to yours. It was related to OOM-2534 per OOM team. They are still working on it. Thanks, Xin Miao Solution Engineering Fujitsu Network Communication (W)972-4
|
By
Xin.Miao@fujitsu.com
· #22230
·
|
|
#oom #helm
#oom
#helm
Ok. Thanks guys. Should have checked Jira first. :)
Ok. Thanks guys. Should have checked Jira first. :)
|
By
Fiachra Corcoran
· #22229
·
|
|
#oom #helm
#oom
#helm
There are a couple of charts affected. See https://jira.onap.org/browse/OOM-2566 Von: onap-discuss@... <onap-discuss@...> Im Auftrag von Fiachra Corcoran Gesendet: Freitag, 2. Ok
There are a couple of charts affected. See https://jira.onap.org/browse/OOM-2566 Von: onap-discuss@... <onap-discuss@...> Im Auftrag von Fiachra Corcoran Gesendet: Freitag, 2. Ok
|
By
alexander.dehn@...
· #22228
·
|
|
#oom #helm
#oom
#helm
I have observed this as well. I believe the problem is that for each release, Helm creates a configMap to keep data that Helm needs to manage the release. For some of the component releases, the data
I have observed this as well. I believe the problem is that for each release, Helm creates a configMap to keep data that Helm needs to manage the release. For some of the component releases, the data
|
By
Jack Lucas
· #22227
·
|
|
#oom #helm
#oom
#helm
Hi OOM Team, When deploying master branch, I am seeing odd behaviour from helm. The "deploy" cmd shows the relevant components get deplopyed: helm deploy onap local/onap --namespace onap -f ~/onap-ove
Hi OOM Team, When deploying master branch, I am seeing odd behaviour from helm. The "deploy" cmd shows the relevant components get deplopyed: helm deploy onap local/onap --namespace onap -f ~/onap-ove
|
By
Fiachra Corcoran
· #22226
·
|
|
#appc #helm Deploying APP-C using helm chart
#appc
#helm
Dear Taka, Thank you for your advice. Previously I git pull by 'git clone -b 5.0.1-ONAP http://gerrit.onap.org/r/oom --recurse-submodules'. I pull the head of master this time. And it works, thank you
Dear Taka, Thank you for your advice. Previously I git pull by 'git clone -b 5.0.1-ONAP http://gerrit.onap.org/r/oom --recurse-submodules'. I pull the head of master this time. And it works, thank you
|
By
Zhuangyang Chen
· #19504
·
|
|
#appc #helm Deploying APP-C using helm chart
#appc
#helm
I saw your failure was on common/etcd. Did you git pull to the head of master for the all OOM repo? Taka APPC PTL
I saw your failure was on common/etcd. Did you git pull to the head of master for the all OOM repo? Taka APPC PTL
|
By
Taka Cho
· #19500
·
|
|
#appc #helm Deploying APP-C using helm chart
#appc
#helm
Hi, I want to deploy APP-C for testing its capability, and I follow oom_quickstart_guide And I use Helm 2.16.1, macOS Catalina version 10.15.1 However, after I modified 'appc enable: true' and run 'ma
Hi, I want to deploy APP-C for testing its capability, and I follow oom_quickstart_guide And I use Helm 2.16.1, macOS Catalina version 10.15.1 However, after I modified 'appc enable: true' and run 'ma
|
By
Zhuangyang Chen
· #19496
·
|
|
ONAP aaf-sms POD not Coming up - 10443: connect: connection refused
#aaf
#dmaap
#dublin
#helm
Hi All, I am trying to deploy aaf and dmaap in a 3 node Cluster (1 Control plane and 2 Worker VM's). dmaap is failing and you can see 2 JOBS are not coming up successfully. Cant figure out what i am m
Hi All, I am trying to deploy aaf and dmaap in a 3 node Cluster (1 Control plane and 2 Worker VM's). dmaap is failing and you can see 2 JOBS are not coming up successfully. Cant figure out what i am m
|
By
Raghu Ram
· #18512
·
|
|
ONAP dmaap-message-router In Error state
#dmaap
#helm
Hi, I found the issue. I used 1 worker node and aaf didnt come up fine. When i tried deploying aaf and dmaap in 1 controlplane + 2 worker nodes then everything came up fine. Thanks for your help. Ragh
Hi, I found the issue. I used 1 worker node and aaf didnt come up fine. When i tried deploying aaf and dmaap in 1 controlplane + 2 worker nodes then everything came up fine. Thanks for your help. Ragh
|
By
Raghu Ram
· #18412
·
|
|
ONAP dmaap-message-router In Error state
#dmaap
#helm
Hi Raghu, Please share the full log of the message router. If the log you shared is the full log of the message router , increase the initial delay for the liveliness check. Thanks, Sunil
Hi Raghu, Please share the full log of the message router. If the log you shared is the full log of the message router , increase the initial delay for the liveliness check. Thanks, Sunil
|
By
UNNAVA, SUNIL
· #18392
·
|
|
ONAP dmaap-message-router In Error state
#dmaap
#helm
Brian, I tried helm deploy and getting same issue aarna@dublin-test-01:~/oom/kubernetes$ helm deploy dev local/aaf --namespace onap --timeout 900 fetching local/aaf release "dev" deployed aarna@dublin
Brian, I tried helm deploy and getting same issue aarna@dublin-test-01:~/oom/kubernetes$ helm deploy dev local/aaf --namespace onap --timeout 900 fetching local/aaf release "dev" deployed aarna@dublin
|
By
Raghu Ram
· #18389
·
|
|
ONAP dmaap-message-router In Error state
#dmaap
#helm
I think you want to use helm deploy not hedlm install Sent via the Samsung Galaxy S8, an AT&T 5G Evolution capable smartphone
I think you want to use helm deploy not hedlm install Sent via the Samsung Galaxy S8, an AT&T 5G Evolution capable smartphone
|
By
Brian Freeman
· #18388
·
|
|
ONAP dmaap-message-router In Error state
#dmaap
#helm
Brian, I tried to install only aaf and dmaap in my setup. I installed aaf using the following command (Didnt change any sleep values in the yaml file) helm install --debug local/aaf -n dev-aaf --names
Brian, I tried to install only aaf and dmaap in my setup. I installed aaf using the following command (Didnt change any sleep values in the yaml file) helm install --debug local/aaf -n dev-aaf --names
|
By
Raghu Ram
· #18387
·
|
|
ONAP dmaap-message-router In Error state
#dmaap
#helm
Brian, Thanks a lot for your input. Let me try again with the steps mentioned by you. Thanks Raghu
Brian, Thanks a lot for your input. Let me try again with the steps mentioned by you. Thanks Raghu
|
By
Raghu Ram
· #18337
·
|
|
ONAP dmaap-message-router In Error state
#dmaap
#helm
Thats not the sequence we usually use for a project re-deployment DMAAP project does alot of post instantiate configuration s you may hae to adjust your timeout 900 to a longer interval – usually helm
Thats not the sequence we usually use for a project re-deployment DMAAP project does alot of post instantiate configuration s you may hae to adjust your timeout 900 to a longer interval – usually helm
|
By
Brian Freeman
· #18336
·
|
|
ONAP dmaap-message-router In Error state
#dmaap
#helm
Hi , I deployed ONAP by following the guide https://onap.readthedocs.io/en/dublin/submodules/oom.git/docs/oom_quickstart_guide.html#quick-start-label I deployed all ONAP components using onap-all.yml
Hi , I deployed ONAP by following the guide https://onap.readthedocs.io/en/dublin/submodules/oom.git/docs/oom_quickstart_guide.html#quick-start-label I deployed all ONAP components using onap-all.yml
|
By
Raghu Ram
· #18335
·
|
|
Helm > Error: trying to send message larger than max
#oom
#helm
#casablanca
#lfn
#kubernetes
Hi, removing old configmaps versions and limiting the helm history to 5-10 versions did the trick for me. > https://github.com/helm/helm/issues/2332#issuecomment-336565784 Regards David -- David Pérez
Hi, removing old configmaps versions and limiting the helm history to 5-10 versions did the trick for me. > https://github.com/helm/helm/issues/2332#issuecomment-336565784 Regards David -- David Pérez
|
By
David Perez Caparros
· #16066
·
|
|
Helm > Error: trying to send message larger than max
#oom
#helm
#casablanca
#lfn
#kubernetes
Hi, I am starting to get errors like the one below when deploying/undeploying with helm, branch Casablanca, running for ~70 days. # helm undeploy dev-sniro-emulator --purge Error: trying to send messa
Hi, I am starting to get errors like the one below when deploying/undeploying with helm, branch Casablanca, running for ~70 days. # helm undeploy dev-sniro-emulator --purge Error: trying to send messa
|
By
David Perez Caparros
· #16047
·
|